Search Catalog
 All Categories    Kaeser Heated Purge Dryers - KED Series
All Categories > Aftercoolers and Dryers > Desiccant Dryers > Kaeser Heated Purge Dryers - KED Series > Item # KED 750  

Item # KED 750

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites

Flow Capacities Maximum inlet flow capacities at various pressures:
To determine a dryer's inlet flow capacity at inlet pressures other than 100 psig, multiply the dryer's rated inlet flow (found in Table 1) by the multiplier from Table 2 that corresponds to the system pressure at the dryer inlet.
KAD Dew Point Options Meet ISO 8573.1 Air Quality Standards (Table 3)
Models KAD and KAD PS allow the user to select outlet pressure dew points corresponding to the four different ISO 8573.1 air quality classes.
KAD E models are preset to deliver the commonly used ISO 8573.1 Class 2 outlet pressure dew point.
Outlet flow capacities:
For dryers operating at less than maximum flow and using the Purge Economizer feature and/or operating at pressures other than 100 psig, contact factory for correct purge flow. -

Average Heater kW (fixed cycle) = (kW required to produce 280°F temperature rise) x (235 min. max heat time) / (240 min. drying time) Actual kW is normally much lower and proportional with the average annual water load presented to the dryer.



Product Family

Desiccant Dryers



Inlet Flow at 100 psig 100ºF

750 scfm


60 in.


59 in.


114 in.

Connection Size (Inlet/Outlet)

3 in.

Connection Type (Inlet/Outlet)



2323 lbs

Purge Flow Rate

53 scfm

Air Available Average


Nom. Heater

10 kW

Avg. Heater

5.0 kW

Pre-Filter (KOR Series)


High Temp After-Filter (HTA Series)


Desiccant Per Tower


Other Options

Dew point monitor
High humidity alarm

Insulation for heated desiccant air dryers

NEMA 4 low ambient protection packages

Parallel piped pre-filters and after-filters

Stainless steel or copper pilot and instrument air tubing and fittings


·  Inlet Pressure Correction Factor


(PDF, 137KB)